• mark-ghost

    阿里云大陆向限速,有什么解决方案嘛?

    和日本vps测速能跑满200兆

    和国内测速去程限的几乎没速度,回程拉满。

    去程:```
    iperf3.exe -c 8...*
    Connecting to host 8...*, port 5201
    [ 5] local 10... port 65134 connected to 8... port 5201
    [ ID] Interval Transfer Bitrate
    [ 5] 0.00-1.01 sec 256 KBytes 2.08 Mbits/sec
    [ 5] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 8.01-9.00 sec 0.00 Bytes 0.00 bits/sec
    [ 5] 9.00-10.01 sec 0.00 Bytes 0.00 bits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bitrate
    [ 5] 0.00-10.01 sec 256 KBytes 210 Kbits/sec sender
    [ 5] 0.00-10.07 sec 80.7 KBytes 65.6 Kbits/sec receiver

    ``回程:``
    iperf3.exe -c 8...* -R
    Connecting to host 8...*, port 5201
    Reverse mode, remote host 8...* is sending
    [ 5] local 10... port 53342 connected to 8... port 5201
    [ ID] Interval Transfer Bitrate
    [ 5] 0.00-1.00 sec 16.2 MBytes 136 Mbits/sec
    [ 5] 1.00-2.01 sec 36.5 MBytes 304 Mbits/sec
    [ 5] 2.01-3.01 sec 33.6 MBytes 283 Mbits/sec
    [ 5] 3.01-4.00 sec 27.5 MBytes 232 Mbits/sec
    [ 5] 4.00-5.00 sec 14.9 MBytes 125 Mbits/sec
    [ 5] 5.00-6.00 sec 11.8 MBytes 98.3 Mbits/sec
    [ 5] 6.00-7.01 sec 32.2 MBytes 268 Mbits/sec
    [ 5] 7.01-8.00 sec 35.0 MBytes 296 Mbits/sec
    [ 5] 8.00-8.30 sec 11.8 MBytes 331 Mbits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bitrate
    [ 5] 0.00-8.30 sec 0.00 Bytes 0.00 bits/sec sender
    [ 5] 0.00-8.30 sec 220 MBytes 222 Mbits/sec receiver
    iperf3: interrupt - the client has terminated by signal Interrupt(2)

    主楼
  • timmyraul

    非线路机被限速很正常吧

    #1
  • kevinhwang

    单纯线路问题。阿里的限速状态是全局,不管国内还是国际互联

    #2
  • reidme

    辣鸡线路,加钱上BGP精品

    #3
  • vpssk

    不要研究了

    #4

发表回复

登录后回复